• Dimension: 140 (L) 150 x (W) 86 x (H) mm • Output Wattage: 1000W • Input voltage: 100-240Vac • Input frequency: 50-60Hz • Input current: 115 Vac @ 12A, 230 Vac @ 6A • IEC-62368
ICT products face the challenge of sustained and stable operation amid grid resilience issues recently. Frequent power outages and blackouts, sometimes affecting multiple areas. IT managers commonly use UPS to address grid resilience issues but UPS selection is an issue for IT managers especially to IT equipment is commonly used worldwide. FSP designs a switched-mode power supply with a battery backup unit into one product, that can replace UPS systems, optimizing power and energy conversion efficiency. EnerXCube series is the best choice for your IT equipment by solving power supply with UPS at the same time.
ICT products face the challenge of sustained and stable operation amid grid resilience issues recently. Frequent power outages and blackouts, sometimes affecting multiple areas. IT managers commonly use UPS to address grid resilience issues but UPS selection is an issue for IT managers especially to IT equipment is commonly used worldwide. FSP designs a switched-mode power supply with a battery backup unit into one product, that can replace UPS systems, optimizing power and energy conversion efficiency. EnerXCube series is the best choice for your IT equipment by solving power supply with UPS at the same time.
ICT products face the challenge of sustained and stable operation amid grid resilience issues recently. Frequent power outages and blackouts, sometimes affecting multiple areas. IT managers commonly use UPS to address grid resilience issues but UPS selection is an issue for IT managers especially to IT equipment is commonly used worldwide. FSP designs a switched-mode power supply with a battery backup unit into one product, that can replace UPS systems, optimizing power and energy conversion efficiency. EnerXCube series is the best choice for your IT equipment by solving power supply with UPS at the same time.
ICT products face the challenge of sustained and stable operation amid grid resilience issues recently. Frequent power outages and blackouts, sometimes affecting multiple areas. IT managers commonly use UPS to address grid resilience issues but UPS selection is an issue for IT managers especially to IT equipment is commonly used worldwide. FSP designs a switched-mode power supply with a battery backup unit into one product, that can replace UPS systems, optimizing power and energy conversion efficiency. EnerXCube series is the best choice for your IT equipment by solving power supply with UPS at the same time.
ICT products face the challenge of sustained and stable operation amid grid resilience issues recently. Frequent power outages and blackouts, sometimes affecting multiple areas, are common and can lead to large-scale disruptions. IT managers commonly use UPS to address grid resilience issues but UPS selection is an issue for IT managers especially for IT equipment that is commonly used worldwide. By integrating a switched-mode power supply with a battery backup unit into one product, we can replace UPS systems, optimizing power and energy conversion efficiency. The enerXBar series is the best choice for your IT equipment because it solves the power supply with UPS at the same time.
ICT products face the challenge of sustained and stable operation amid grid resilience issues recently. Frequent power outages and blackouts, sometimes affecting multiple areas, are common and can lead to large-scale disruptions. IT managers commonly use UPS to address grid resilience issues but UPS selection is an issue for IT managers especially for IT equipment that is commonly used worldwide. By integrating a switched-mode power supply with a battery backup unit into one product, we can replace UPS systems, optimizing power and energy conversion efficiency. The enerXBar series is the best choice for your IT equipment because it solves the power supply with UPS at the same time.
FSP2000-20HM is a redundant power supply module base on CRPS standard. WIth the option to support immersion cooling operation, the power supply comes to offer the total power capacity up to 2000 Watts, and provides PMbus features, which makes it be able to communicate with motherboard in the liquid. In addition, the power supply is ideally the best choice for datacenter, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP2700-20HM is a redundant power supply module base on CRPS standard. WIth the option to support immersion cooling operation, the power supply comes to offer the total power capacity up to 2700 Watts, and provides PMbus features, which makes it be able to communicate with motherboard in the liquid. In addition, the power supply is ideally the best choice for datacenter, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP3200-20HM is a redundant power supply module base on CRPS standard. WIth the option to support immersion cooling operation, the power supply comes to offer the total power capacity up to 3200 Watts, and provides PMbus features, which makes it be able to communicate with motherboard in the liquid. In addition, the power supply is ideally the best choice for datacenter, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
3.3KW battery charger;330V/10A output Designed to industrial and LEV wide application. Fan cooling and Liquid cooling module for choose. Paralle system up to 10.
FSP600-1CH01F-C battery charger was designed in small, compact,high efficiency concept. Fan cooling with fully sealed mechanical enclosure to keep surface in lower temperature. Customized cable; connector and charging profile. CANBUS protocol Experienced safety team help customer to meet different region policy. Tested with battery to simulate real condition. Application: LEV/ Industry FSP provide customized services
700W 48V /14A battery charger Fanless cooling design IP65 dust and waterproof LED inducator LEV and Industry application
This product is a 65 watts AC to DC power supply intended for use in IPC Box, Embedded Systems, and POS Systems, etc. This adapter operates at 90 to 264 Vac input voltage . The unit is designed for ITE application.
This product is a 65 watts AC to DC power supply intended for use in Network related systems, Edge systems, etc. This adapter operates at 90 to 264 Vac input voltage . The unit is designed for ITE application.
This product is a 400 watts AC to DC adapter intended for use in Networking related systems. This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is a 230 watts AC to DC adapter intended for use in POE system etc. that have a high wattage demands. This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
FSP-PH51A is a PDB(power distribution board) designed for CRPS (common redundant power supply) base on its standard. FSP-PH51A supports total power up to 2400 Watts with cable management design. In addition, the PDB is featuring its cable customization and PMBus capability, ideally the best choice for datacenter, workstation, telecom applications.
FSP-FC250C2 is a PDB(power distribution board) designed for CRPS (common redundant power supply) base on its standard. FSP-FC250C2 supports total power up to 3200 Watts with cable management design. In addition, the PDB is featuring its cable customization and PMBus capability, ideally the best choice for datacenter,Edge AI, workstation, telecom applications.
FSP650-20RJB is a redundant power supply module base on CRPS standard. The power supply comes to offer the total power capacity up to 650 Watts, and provides PMBus features, which makes it to be able communicate with motherboard. In addition, the power supply is ideally the best choice for PoE Switch, or any other networking applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP-ATX250 is a PDB(power distribution board) designed for CRPS (common redundant power supply) base on its standard. FSP-FC250C supports total power up to 2400 Watts with cable management design. In addition, the PDB is featuring its cable customization and PMBus capability, ideally the best choice for datacenter, workstation, telecom applications.
This product is a 84 watts AC to DC power supply intended for use in IPC Box, Embedded Systems, and POS Systems, etc. This adapter operates at 90 to 264 Vac input voltage . The unit meets LPS requirements, and is designed for ITE application.
This product is a 90 watts AC to DC adapter intended for use in Mini-PC, NB, POS Systems, etc. This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
FSP650-50FUB is an industrial level of switching power supply with high efficiency. The power supply comes to offer easy maintenance and the total power capacity up to 650 Watts, which is perfectly to meet edge AI or GPU servers.
This product is a 240 watts AC to DC USB PD power supply which meet USB PD 3.1. This adapter operates at 90 to 264 VAC input voltage . The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application such as mobil phones, digital camers, laptops and e-Bikes.
This AC-DC switching power supplies is a Class-I (with Protection Earth) safety construction in a package of 2 x 4 x 1.126 inches. It’s suitable for 1U chassis design. Standby power consumption less than 0.5W at 0.2W load condition is comply with Energy Star requirement. This PSU is capable of delivering 250 watts of continuous power at 14 CFM forced air cooling or 150 watts of continuous power at convection cooling, both are operating at 50℃ temperature. The product is suitable for audio, information, and networking application.
This product is a 45 watts AC to DC USB Type-C PD power supply and supports PPS model, intended for use in portable applications with Type-C charging port. This adapter operates at 90 to 264 VAC input voltage . The Type-C PD Charger meets EN55032, EN55024 and FCC class B emission limits, and is designed for mobile phone, tablet and other mobile devices.
This product is a 65 watts AC to DC USB Type-C PD power supply intended for use in portable applications with Type-C charging port. This adapter operates at 90 to 264 VAC input voltage . The Type-C PD Charger meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
FSP-FC250C is a PDB(power distribution board) designed for CRPS (common redundant power supply) base on its standard. FSP-FC250C supports total power up to 2400 Watts with cable management design. In addition, the PDB is featuring its cable customization and PMBus capability, ideally the best choice for datacenter, workstation, telecom applications.
FSP3600-20HE is a redundant power supply module base on CRPS standard. The power supply comes to offer the total power capacity up to 3600 Watts, and provides PMbus features, which makes it be able to communicate with motherboard. In addition, the power supply is ideally the best choice for datacenter, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP3200-20HE is a redundant power supply module base on CRPS standard. The power supply comes to offer the total power capacity up to 3200 Watts, and provides PMbus features, which makes it be able to communicate with motherboard. In addition, the power supply is ideally the best choice for datacenter, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
This product is an 135 watts AC to DC adapter intended for use in AIO, NB, POS Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 120 watts AC to DC adapter intended for use in AIO, NB, POS Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 180 watts AC to DC adapter intended for use in AIO, NB, POS Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is a 90 watts AC to DC adapter intended for use in AIO, NB, POS Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 150 watts AC to DC adapter intended for use in AIO, NB, POS Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
FSP1800C-1Q01C Onboard Charger Overview The FSP1800C-1Q01C is a high-performance 1800W onboard charger designed for electric vehicles and industrial automation systems. It provides a main output of 28–60V at 30A, along with a low-voltage auxiliary output of 12V at 0.3A. This durable charger features a fan-cooled metal enclosure and is rated IP65, providing excellent protection against dust, dirt, and water, making it ideal for harsh environments. It supports standard Constant Current/Constant Voltage (CC/CV) mode, as well as Constant Power (CP) mode, providing flexible charging profiles. The built-in isolated CAN Bus protocol ensures seamless communication with vehicle control systems. Our experienced safety engineering team ensures compliance with various regional standards and regulations. Each unit undergoes rigorous testing with real batteries to simulate actual usage conditions. Applications include electric vehicles (EVs), electric forklifts, automated guided vehicles (AGVs), and autonomous mobile robots (AMRs).
• Dimension: 200 (L) 150 x (W) 86 x (H) mm • Output Wattage: 2500W • Input voltage: 200-240Vac • Input frequency: 50-60Hz • Input current: 230 Vac @ 15A • IEC-62368
FSP2400-22HM is a redundant power supply module base on M-CRPS standard. The power supply comes to offer the total power capacity up to 2400 Watts, and provides PMbus features, which makes it be able to communicate with motherboard. In addition, the power supply is ideally the best choice for datacenter, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP2700-22HM is a redundant power supply module base on M-CRPS standard. The power supply comes to offer the total power capacity up to 2700 Watts, and provides PMbus features, which makes it be able to communicate with motherboard. In addition, the power supply is ideally the best choice for datacenter, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP3200-22HM is a redundant power supply module base on M-CRPS standard. The power supply comes to offer the total power capacity up to 3200 Watts, and provides PMbus features, which makes it be able to communicate with motherboard. In addition, the power supply is ideally the best choice for datacenter, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP3000-20FE is a redundant power supply module base on CRPS standard. The power supply comes to offer the total power capacity up to 3000 Watts, and provides PMbus features, which makes it be able to communicate with motherboard. In addition, the power supply is ideally the best choice for datacenter, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP3200-20HM is a redundant power supply module base on CRPS standard. The power supply comes to offer the total power capacity up to 3200 Watts, and provides PMbus features, which makes it be able to communicate with motherboard. In addition, the power supply is ideally the best choice for datacenter, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP1000M-60PG is an ATX Medical power supply. It offers a standard ATX form factor 165 x 150 x 86 mm, and a total power capacity of up to 1000 Watts. This product meets EN55011 class B emission limits and is suitable for imaging equipment such as CT, ultrasound, X-ray display, endoscopy, and other equipment.
This AC-DC switching power supply is Class-I design (with Protect Earth safety construction) in a package of 3 x 5 inches form factor and is suitable for 1U chassis. PSU is isolated between 54V & 12V output, also isolated between the Protect Earth and Return which is suitable for PoE networking applications. This PSU is capable of delivering 262 watts of continuous power under 7 CFM conditions and 50℃operation temperature.
This product is a 60 watts AC to DC power supply intended for use in IPC Systems, Embedded Systems, Printers, POS Systems, etc that have a middle wattage demands. This adapter operates at 90 to 264 VAC input voltage . The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
FSP900M-60PF is an ATX Medical power supply. It offers a standard 1U form factor 240 x 100 x 41 mm, and a total power capacity of up to 900 Watts. This product meets EN55011 class B emission limits and is suitable for imaging equipment such as CT, ultrasound, X-ray display, endoscopy, and other equipment.
FSP300M-50PE is an ATX Medical power supply. It offers a standard Flex form factor 190 × 82 × 41 mm, and a total power capacity of up to 400 Watts. This product meets EN55011 class B emission limits and is suitable for imaging equipment such as CT, ultrasound, X-ray display, endoscopy, and other equipment.
This product is Class I open frame medical power supply, PCB constructed in a package of 3 × 5 inch, which output voltage is 24V and maximum output power is 260W. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
FSP065M-DUA is a high-efficiency USB-PD medical power supply with an IEC 320/C14 AC inlet, with an output voltage is 5/9/12/15/20V and a maximum output power is 65W. The unit approved medical safety and certified EMC medical standards and is designed for medical applications.
FSP400M-50PE is an ATX Medical power supply. It offers a standard Flex form factor 190 × 82 × 41 mm, and a total power capacity of up to 400 Watts. It meets EN55011 class B emission limits and is suitable for imaging equipment such as CT, ultrasound, X-ray display, endoscopy, and other equipment.
This product is high efficiency desktop adapter with IEC 320/C6 AC inlet, which output voltage is 12V and maximum output power is 60W. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This product is high efficiency desktop adapter with IEC 320/C14 AC inlet, which output voltage is 12V and maximum output power is 60W. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This AC-DC switching power supply is Class-I design (with Protect Earth safety construction) in a package of 3.54 x 7.5 inches form factor and is suitable for 1U chassis. PSU is isolated between 54V & 12V output, also isolated between the Protect Earth and Return which is suitable for PoE networking applications. This PSU is capable of delivering 550 watts of continuous power under 19 CFM conditions and 50℃operation temperature.
This product is Class I open frame medical power supply in a package of 3 × 5 × 1.5 inch, which output voltage is 36V and maximum output power is 200W at 5.3 CFM forced air cooling or 150W at convection cooling. The unit is constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This product is high efficiency desktop adapter (medical power supply) with IEC 320/C8 AC inlet, which output voltage is 36V and maximum output power is 150W. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This AC-DC switching power supplies in a package of 3 x 5 inches is a Class-I PSU and no load power consumption less than 0.21W. This PSU is capable of delivering 200 watts continuous power at 7 CFM forced air cooling or 150 watts continuous power at convection cooling and 50℃ operation temperature. Product is suitable for audio & video, display, information, and networking application.
This AC-DC switching power supplies in a package of 3 x 5 inches is a Class-I PSU and no load power consumption less than 0.21W. This PSU is capable of delivering 200 watts continuous power at 7 CFM forced air cooling or 150 watts continuous power at convection cooling and 50℃ operation temperature. Product is suitable for audio & video, display, information, and networking application.
This AC-DC switching power supplies in a package of 3 x 5 inches is a Class-I PSU and no load power consumption less than 0.21W. This PSU is capable of delivering 200 watts continuous power at 7 CFM forced air cooling or 150 watts continuous power at convection cooling and 50℃ operation temperature. Product is suitable for audio & video, display, information, and networking application.
This AC-DC switching power supply in a package of 2 x 4 inches is a compact Class-II PSU and input power consumption of less than 0.5W which complies with DOE regulation requirements if load conditions are less than 0.2W. This PSU is capable of delivering 65 watts of continuous power at convection cooling and 50℃ operation temperature. The product is suitable for audio & video, display, information, and networking application.
This AC-DC switching power supply in a package of 2 x 4 inches is a compact Class-II PSU and input power consumption of less than 0.5W which complies with DOE regulation requirements if load conditions are less than 0.2W. This PSU is capable of delivering 65 watts of continuous power at convection cooling and 50℃ operation temperature. The product is suitable for audio & video, display, information, and networking application.
This AC-DC switching power supply in a package of 2 x 4 inches is a compact Class-II PSU and input power consumption of less than 0.5W which complies with DOE regulation requirements if load conditions are less than 0.2W. This PSU is capable of delivering 65 watts of continuous power at convection cooling and 50℃ operation temperature. The product is suitable for audio & video, display, information, and networking application.
This AC-DC switching power supply in a package of 2 x 4 inches is a compact Class-II PSU and input power consumption of less than 0.5W which complies with DOE regulation requirements if load conditions are less than 0.2W. This PSU is capable of delivering 65 watts of continuous power at convection cooling and 50℃ operation temperature. The product is suitable for audio & video, display, information, and networking application.
This series AC-DC switching power supply is Class-I design which is with Protected Earth. The units are constructed on a printed circuit board in a 3 x 5 x 1.4 inches form factor. Input power less than 0.5W is suitable for end products that have standby mode requirements. PSU is capable of delivering 450 watts of continuous power at 18 CFM forced air cooling or 200 watts at convection cooling and 50℃operation temperature. They are suitable for information, industry, and PoE applications.
This series AC-DC switching power supply is Class-I design which is with Protected Earth. The units are constructed on a printed circuit board in a 2 x 4 inches form factor. Input power less than 0.5W is suitable for end products that have standby mode requirements. PSU is capable of delivering 150 watts of continuous power at 7 CFM forced air cooling or 100 watts of continuous power at convection cooling and 50℃operation temperature. They are suitable for information, audio/video, and networking applications.
This series AC-DC switching power supply is Class-I design which is with Protected Earth. The units are constructed on a printed circuit board in a 2 x 4 inches form factor. Input power less than 0.5W is suitable for end products that have standby mode requirements. PSU is capable of delivering 150 watts of continuous power at 7 CFM forced air cooling or 100 watts of continuous power at convection cooling and 50℃operation temperature. They are suitable for information, audio/video, and networking applications.
This product is high efficiency desktop adapter (medical power supply) with IEC 320/C8 AC inlet, which output voltage is 48V and maximum output power is 150W. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This product is high efficiency desktop adapter (medical power supply) with IEC 320/C8 AC inlet, which output voltage is 19V and maximum output power is 150W. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This product is high efficiency desktop adapter (medical power supply) with IEC 320/C8 AC inlet, which output voltage is 24V and maximum output power is 150W. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This product is high efficiency desktop adapter (medical power supply) with IEC 320/C14 AC inlet, which output voltage is 48V and maximum output power is 150W. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This product is high efficiency desktop adapter (medical power supply) with IEC 320/C14 AC inlet, which output voltage is 19V and maximum output power is 150W. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This product is high efficiency desktop adapter (medical power supply) with IEC 320/C14 AC inlet, which output voltage is 24V and maximum output power is 150W. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This AC-DC switching power supplies is a Class-I (with Protection Earth) safety construction in a package of 2 x 4 x 1.126 inches. It’s suitable for 1U chassis design. Standby power consumption less than 0.5W at 0.2W load condition is comply with Energy Star requirement. This PSU is capable of delivering 250 watts of continuous power at 14 CFM forced air cooling or 150 watts of continuous power at convection cooling, both are operating at 50℃ temperature. The product is suitable for audio, information, and networking application.
This AC-DC switching power supplies is a Class-I (with Protection Earth) safety construction in a package of 2 x 4 x 1.126 inches. It’s suitable for 1U chassis design. Standby power consumption less than 0.5W at 0.2W load condition is comply with Energy Star requirement. This PSU is capable of delivering 250 watts of continuous power at 14 CFM forced air cooling or 150 watts of continuous power at convection cooling, both are operating at 50℃ temperature. The product is suitable for audio, information, and networking application.
FSP120M-KAC AC/DC switching power supplies is BF Class 120w continuous output power with an IEC320/C8 inlet to mate with interchangeable cord for world-wide use. Low profile and high efficiency features with excellent IP54 water proof feature. EMI meet EN55011 Class B, is designed for medical application.
FSP120M-KBC AC/DC switching power supplies is BF Class 120w continuous output power with an IEC320/C8 inlet to mate with interchangeable cord for world-wide use. Low profile and high efficiency features with excellent IP54 water proof feature. EMI meet EN55011 Class B, is designed for medical application.
FSP120M-KFC AC/DC switching power supplies is BF Class 120w continuous output power with an IEC320/C8 inlet to mate with interchangeable cord for world-wide use. Low profile and high efficiency features with excellent IP54 water proof feature. EMI meet EN55011 Class B, is designed for medical application.
FSP120M-KAA AC/DC switching power supplies is BF Class 120w continuous output power with an IEC320/C14 inlet to mate with interchangeable cord for world-wide use. Low profile and high efficiency features with excellent IP54 water proof feature. EMI meet EN55011 Class B, is designed for medical application.
FSP120M-KBA AC/DC switching power supplies is BF Class 120w continuous output power with an IEC320/C14 inlet to mate with interchangeable cord for world-wide use. Low profile and high efficiency features with excellent IP54 water proof feature. EMI meet EN55011 Class B, is designed for medical application.
This is a high efficiency series AC/DC switching power supplies which can deliver 25W continuous output power for 5V model. High efficiency feature comply with DOE Level VI & ErP tier II. Compact dimension with an IEC320/C14 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011, EN55032 and FCC class B emission limits.
This product is PC power in the flex form factor 190 × 82 × 41mm, which maximum output power is 250W and efficiency is 82%85%82%. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This product is PC power in the flex form factor 190 × 82 × 41mm, which maximum output power is 220W and efficiency is 82%85%82%. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This product is PC power in the 1U form factor 190 × 100 × 41mm, which maximum output power is 300W and efficiency is 80%80%80%. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This product is PC power in the 1U form factor 190 × 100 × 41mm, which maximum output power is 350W and efficiency is 80%80%80%. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This product is high high-efficiency desktop adapter with an IEC 320/C6 AC inlet, with an output voltage is 15V and a maximum output power is 90W. The unit approved medical safety and certified EMC medical standards and is designed for medical applications.
This product is high high-efficiency desktop adapter with an IEC 320/C8 AC inlet, with an output voltage is 15V and a maximum output power is 90W. The unit approved medical safety and certified EMC medical standards and is designed for medical applications.
This product is high high-efficiency desktop adapter with an IEC 320/C14 AC inlet, with an output voltage is 12V and a maximum output power is 90W. The unit approved medical safety and certified EMC medical standards and is designed for medical applications.
This product is high high-efficiency desktop adapter with an IEC 320/C6 AC inlet, with an output voltage is 12V and a maximum output power is 90W. The unit approved medical safety and certified EMC medical standards and is designed for medical applications.
This product is high high-efficiency desktop adapter with an IEC 320/C8 AC inlet, with an output voltage is 12V and a maximum output power is 90W. The unit approved medical safety and certified EMC medical standards and is designed for medical applications.
This product is high high-efficiency desktop adapter with an IEC 320/C14 AC inlet, with an output voltage is 24V and a maximum output power is 90W. The unit approved medical safety and certified EMC medical standards and is designed for medical applications.
This series AC-DC switching power supply is Class-I design which is with Protected Earth. The units are constructed on a printed circuit board in a 160 x 75 x 36.1 mm form factor. Input power less than 0.5W is suitable for end products that have standby mode requirements. PSU is capable of delivering 200 watts of continuous or 400 watts of peak power (12V at 300W) at convection cooling and 50℃operation temperature. They are suitable for industry and information applications.
This AC-DC switching power supplies in a package of 180 x 84 x 41.4 mm is a Class-I (with Protection Earth) safety construction and feature with 0.5W low input power consumption at 0.2W load which is comply with Energy Star requirement. This PSU is capable of delivering continuous power 240 watts at convection cooling and 300W at forced air condition, and 480 watts peak power at 50℃ operation temperature. Product is suitable for industry control applications.
This series AC-DC switching power supply is Class-I design which is with Protected Earth. The units are constructed on a printed circuit board in a 3 x 5 x 1.4 inches form factor. Input power less than 0.5W is suitable for end products that have standby mode requirements. PSU is capable of delivering 450 watts of continuous power at 18 CFM forced air cooling or 200 watts at convection cooling and 50℃operation temperature. They are suitable for information, industry, and PoE applications.
FSP250-50RGB is a standard 1U Redundant switching power supply. The power supply comes to offer the total power capacity up to 250 Watts, which makes it to be perfectly used in an industrial environment. In addition, the power supply is ideally the best choice for IPC controller, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP400-50RGB is a standard 1U Redundant switching power supply. The power supply comes to offer the total power capacity up to 400 Watts, which makes it to be perfectly used in an industrial environment. In addition, the power supply is ideally the best choice for IPC controller, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP300-50RGB is a standard 1U Redundant switching power supply. The power supply comes to offer the total power capacity up to 300 Watts, which makes it to be perfectly used in an industrial environment. In addition, the power supply is ideally the best choice for IPC controller, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
• Dimension: 130 (L) x 150 (W) x 86 (H) mm • Output Wattage: 850W • Input voltage: 90-264Vac • Input frequency: 47-63Hz • Input current: 115Vac @ 11A, 230Vac @ 5.5A • IEC-62368
• Dimension: 130 (L) x 150 (W) x 86 (H) mm • Output Wattage: 850W • Input voltage: 90-264Vac • Input frequency: 47-63Hz • Input current: 115Vac @ 13A, 230Vac @ 6A • IEC-62368
• Dimension: 180 (L) 150 x (W) 86 x (H) mm • Output Wattage: 1650W • Input voltage: 110-240Vac • Input frequency: 50-60Hz • Input current: 115 Vac @ 15A, 230 Vac @ 10A • IEC-62368
• Dimension: 180 (L) x 150 (W) x 86 (H) mm • Output Wattage: 1350W • Input voltage: 110-240Vac • Input frequency: 50-60Hz • Input current: 230Vac @ 10A • IEC-62368
• Dimension: 140 (L) x 150 (W) x 86 (H) mm • Output Wattage: 750W • Input voltage: 100-240Vac • Input frequency: 50-60Hz • Input current: 115Vac @ 9.5A, 230Vac @ 4A • IEC-62368
• Dimension: 140 (L) x 150 (W) x 86 (H) mm • Output Wattage: 850W • Input voltage: 100-240Vac • Input frequency: 50-60Hz • Input current: 115Vac @ 10.5A, 230Vac @ 5A • IEC-62368
• Dimension: 150 (L) 150 x (W) 86 x (H) mm • Output Wattage: 850W • Input voltage: 100-240Vac • Input frequency: 50-60Hz • Input current: 115 Vac @ 13A, 230 Vac @ 6A • IEC-62368
• Dimension: 180 (L) 150 x (W) 86 x (H) mm • Output Wattage: 1350W • Input voltage: 100-240Vac • Input frequency: 50-60Hz • Input current: 115 Vac @ 15A, 230 Vac @ 8A • IEC-62368
• Dimension: 180 (L) x 150 (W) x 86 (H) mm • Output Wattage: 1650W • Input voltage: 200-240Vac • Input frequency: 47-63Hz • Input current: 230Vac @ 10A • IEC-62368
This AC-DC switching power supply is Class-I design (with Protect Earth safety construction) in a package of 3 x 5 inches form factor and is suitable for 1U chassis. PSU is isolated between 54V & 12V output, also isolated between the Protect Earth and Return which is suitable for PoE networking applications. This PSU is capable of delivering 320 watts of continuous power under 7 CFM conditions and 50℃operation temperature.
FSP2700-20HM is a redundant power supply module base on CRPS standard. The power supply comes to offer the total power capacity up to 2700 Watts, and provides PMbus features, which makes it be able to communicate with motherboard. In addition, the power supply is ideally the best choice for datacenter, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
This AC-DC switching power supply is Class-I design (with Protect Earth safety construction) in a package of 3 x 5 inches form factor and is suitable for 1U chassis. PSU is isolated between 54V & 12V output, also isolated between the Protect Earth and Return which is suitable for PoE networking applications. This PSU is capable of delivering 200 watts of continuous power under 7 CFM conditions and 50℃operation temperature.
FSP850-50ADB is a high wattage ATX switching power supply. The power supply comes to offer the total power capacity up to 850 Watts, and provides cable management features, which makes it to be perfectly used in an industrial environment. In addition, the power supply is ideally the best choice for AI server, graphic design workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP1000-50ADB is a high wattage ATX switching power supply. The power supply comes to offer the total power capacity up to 1000 Watts, and provides cable management features, which makes it to be perfectly used in an industrial environment. In addition, the power supply is ideally the best choice for AI server, graphic design workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP1200-50ADB is a high wattage ATX switching power supply. The power supply comes to offer the total power capacity up to 1200 Watts, and provides cable management features, which makes it to be perfectly used in an industrial environment. In addition, the power supply is ideally the best choice for AI server, graphic design workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
• Dimension: 140 (L) 150 x (W) 86 x (H) mm • Output Wattage: 750W • Input voltage: 100-240Vac • Input frequency: 50-60Hz • Input current: 115 Vac @ 10A, 230 Vac @ 5A • IEC-62368
• Dimension: 140 (L) 150 x (W) 86 x (H) mm • Output Wattage: 850W • Input voltage: 100-240Vac • Input frequency: 50-60Hz • Input current: 115 Vac @ 12A, 230 Vac @ 6A • IEC-62368
This product is Class I open frame medical power supply, PCB constructed in a package of 3 × 5 inch, which output voltage is 12V and maximum output power is 260W. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This product is Class I open frame medical power supply, PCB constructed in a package of 3 × 5 inch, which output voltage is 19V and maximum output power is 260W. The unit approved medical safety and certified EMC medical standard, and is designed for medical applications.
This product is a 45 watts AC to DC Type-C PD power supply intended for USB PD applications. This Type-C adapter operates at 90 to 264 VAC input voltage . The Type-C PD adapter meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
Mobile Phones,Tablets,Automotive convenience ports,TV,Mass Storage,Expansion Ports,Laptops,Monitors,Payment terminal,Set-top boxes,Workstations
This product is a 45 watts AC to DC Type-C PD power supply intended for use in USB PD applications. This Type-C PD adapter operates at 90 to 264 VAC input voltage . The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is a 100 watts AC to DC USB-C PD power supply intended for using in USB PD applications. This adapter operates at 90 to 264 VAC input voltage . The Type-C PD Charger meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
FSP400-50AMB is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 400W, and provides one extra 24Vdc output, which makes it to be perfectly used for IPC system with motor or printer environment. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP300-50FRB is an industrial level of switching power supply. The power supply comes to offer easy maintenance and the total power capacity up to 300 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP500-50WDB is a standard 2U form factor switching power supply. The power supply comes to offer the total power capacity up to 500 Watts, which makes it to be perfectly used in an industrial environment. In addition, the power supply is ideally the best choice for IPC controller, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP500-50UDB is a standard 1U form factor switching power supply. The power supply comes to offer the total power capacity up to 500 Watts, which makes it to be perfectly used in an industrial environment. In addition, the power supply is ideally the best choice for IPC controller, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP500-50WCB is a standard 2U form factor switching power supply. The power supply comes to offer the total power capacity up to 500 Watts, which makes it to be perfectly used in an industrial environment. In addition, the power supply is ideally the best choice for IPC controller, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP500-50UCB is a standard 1U form factor switching power supply. The power supply comes to offer the total power capacity up to 500 Watts, which makes it to be perfectly used in an industrial environment. In addition, the power supply is ideally the best choice for IPC controller, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP500-80AAB is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 500W, and provides one extra 24Vdc output, which makes it to be perfectly used for IPC system with motor or printer environment. In addition, the power supply is ideally the best choice for ATM, POS, KIOSK or any other system with printer applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP500-50FDB is an is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 500 Watts, which makes it to be perfectly fit in a standard 1U server chassis, and used in an industrial or small space environment. In addition, the power supply is ideally the best choice for server, communication or any other automation applications. This product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP600-80PSA(SK) is an industrial level of switching power supply. The power supply comes to offer easy maintenance and the total power capacity up to 700 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP700-80PSA(SK) is an industrial level of switching power supply. The power supply comes to offer easy maintenance and the total power capacity up to 700 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP500-70PFL(SK) is an industrial level of switching power supply. The power supply comes to offer easy maintenance and the total power capacity up to 500 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP850-50FGPH3 is an industrial level of switching power supply. The power supply comes to offer PMBus communication port and the total power capacity up to 850 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP500-80AGGBM(M) is an industrial level of switching power supply. The power supply comes to offer easy maintenance and the total power capacity up to 500 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP220-50FGBBI(M) is an industrial level of switching power supply. The power supply comes to offer easy maintenance and the total power capacity up to 220 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP180-50FGNBI(M) is an industrial level of switching power supply. The power supply comes to offer easy maintenance and the total power capacity up to 180 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP150-50FGNBI(M) is an industrial level of switching power supply. The power supply comes to offer easy maintenance and the total power capacity up to 150 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
This product is an 45 watts AC to DC adapter intended for use in AIO, NB, PC Systems, NUC, Mini-ITX Systems etc. that have a middle wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 45 watts AC to DC adapter intended for use in AIO, NB, PC Systems, NUC, Mini-ITX Systems etc. that have a middle wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is a 40 watts AC to DC power supply intended for use in IPC Systems, Embedded Systems, Printers, POS Systems, etc that have a middle wattage demands. This adapter operates at 90 to 264 VAC input voltage . The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
FSP2000-52AGPBI is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 2000 Watts and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, FSP2000-A0AGPBI comes with 16 PCI-E 6+2 pin connectors, the power supply is ideally the best choice for server, workstation, GPGPU, even the mining machine/AI/deep learning applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide. Notice: Using the power supply for mining will negate the warranty of the power supply except additional contract.
This product is a 48 watts AC to DC power supply intended for use in IPC Systems, Embedded Systems, Printers, POS Systems, etc that have a middle wattage demands. This adapter operates at 90 to 264 VAC input voltage . The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is a 60 watts AC to DC adapter intended for use in thermal printers, printers, POS systems that have a peak power request. This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 50 watts AC to DC adapter intended for use in IPC Systems, Communication Systems, Embedded Systems, PoE Systems, etc. that have a middle wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 50 watts AC to DC adapter intended for use in IPC Systems, Communication Systems, Embedded Systems, PoE Systems, etc. that have a middle wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is a 50 watts AC to DC power supply intended for use in IPC Systems, Embedded Systems, Printers, POS Systems, etc that have a middle wattage demands. This adapter operates at 90 to 264 VAC input voltage . The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 65 watts AC to DC adapter intended for use in IPC Systems, Communication Systems, Embedded Systems, PoE Systems, etc. that have a middle wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 65 watts AC to DC adapter intended for use in IPC Systems, Communication Systems, Embedded Systems, PoE Systems, etc. that have a middle wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 180 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, AIO, NB, PC Systems, Mini-ITX Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is a 100 watts AC to DC adapter intended for use in thermal printers, printers, POS systems that have a peak power request. This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55022, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 96 watts AC to DC adapter intended for use in IPC systems, Embedded Systems, Printers, Monitors and POS Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 120 watts AC to DC adapter intended for use in IPC systems, Embedded Systems, Printers, Monitors and POS Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 150 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, AIO, NB, PC Systems, Mini-ITX Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55022, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 150 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, AIO, NB, PC Systems, Mini-ITX Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
FSP700-802UK is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 700 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP700-801UK is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 700 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
FSP600-801UK is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 600 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
This product is an 120 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, AIO, NB, PC Systems, Mini-ITX Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 12 watts fixed US plug AC to DC adapter intended for use in Consumer Electronic Systems that has a small wattage demands. This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 18 watts fixed US plug AC to DC adapter intended for use in Consumer Electronic Systems that has a small wattage demands. This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is a 65 watts AC to DC Type-C PD power supply intended for using in USB PD applications. This Type-C PD adapter operates at 90 to 264 VAC input voltage . The Type-C PD Charger meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 330 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 330 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 230 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 230 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 150 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 150 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55022, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 150 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 150 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55022, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 150 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 90 watts AC to DC adapter intended for use in IPC Systems, Communication Systems, Embedded Systems, PoE Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 90 watts AC to DC adapter intended for use in IPC systems, Embedded Systems, Printers, Monitors and POS Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55022, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 90 watts AC to DC adapter intended for use in AIO, NB, PC Systems, Mini-ITX Systems etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 90 watts AC to DC adapter intended for use in IPC systems, Embedded Systems, Printers, Monitors and POS Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 90 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, AIO, NB, PC Systems, Mini-ITX Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 90 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, AIO, NB, PC Systems, Mini-ITX Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 90 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, AIO, NB, PC Systems, Mini-ITX Systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is a 75 watts AC to DC power supply intended for use in IPC Systems, Embedded Systems, Printers, POS Systems, etc that have a middle wattage demands. This adapter operates at 90 to 264 VAC input voltage . The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is a 84 watts AC to DC power supply intended for use in IPC Systems, Embedded Systems, Printers, POS Systems, etc that have a middle wattage demands. This adapter operates at 90 to 264 VAC input voltage . The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 65 watts AC to DC adapter intended for use in AIO, NB, PC Systems, NUC, Mini-ITX Systems etc. that have a middle wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 45 watts AC to DC adapter intended for use in AIO, NB, PC Systems, NUC, Mini-ITX Systems etc. that have a middle wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 180 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 180 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is a 50 watts AC to DC power supply intended for use in IPC Systems, Embedded Systems, Printers, POS Systems, etc that have a middle wattage demands. This adapter operates at 90 to 264 VAC input voltage . The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is a 60 watts AC to DC power supply intended for use in IPC Systems, Embedded Systems, Printers, POS Systems, etc that have a middle wattage demands. This adapter operates at 90 to 264 VAC input voltage . The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 270 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 270 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 270 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 270 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 240 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is a 60 watts AC to DC adapter intended for use in thermal printers, printers, POS systems that have a peak power request. This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55022, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 40 watts AC to DC adapter intended for use in IPC Systems, Communication Systems, Embedded Systems, PoE Systems, etc. that have a middle wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55022, EN55024 and FCC class B emission limits, and is designed for ITE application.
This product is an 180 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application.
FSP-FC210C/FSP-FC210CE is a PDB(power distribution board) designed for CRPS (common redundant power supply) base on its standard. FSP-FC210C supports total power up to 2400 Watts, while FSP-FC210CE supports 1200W. In addition, the PDB is featuring its short length and PMBus capability, ideally the best choice for datacenter, workstation, telecom applications.
The recent energy crisis has led to high electricity bills, and many countries are facing power problems such as insufficient power supply to meet electricity demand, resulting in limited electricity consumption for users. EnerX 3000 can be applied to independent pico-grids, and with the rising awareness of sustainable environmental protection, solar energy is used during the day time and storing the remaining green electricity for discharging it to loads at night time can effectively reduce the dependence on the grid and the electricity bills.
Class-I design in a 3”x5” package which delivery 200W continuous output power at 40℃ convection cooling or 350W at 18 CFM forced air cooling. PSU provide 12V isolated fan driver. Product is suitable for audio & video, display, information, and networking application.
Class-I design in a 3”x5” package which delivery 200W continuous output power at 40℃ convection cooling or 350W at 18 CFM forced air cooling. PSU provide 12V isolated fan driver. Product is suitable for audio & video, display, information, and networking application.
Class-I design in a 3”x5” package which delivery 200W continuous output power at 40℃ convection cooling or 350W at 18 CFM forced air cooling. PSU provide 12V isolated fan driver. Product is suitable for audio & video, display, information, and networking application.
Class-I design in a 3”x5” package which delivery 200W continuous output power at 40℃ convection cooling or 350W at 18 CFM forced air cooling. PSU provide 12V isolated fan driver. Product is suitable for audio & video, display, information, and networking application.
This is a low profile AC-DC switching power supplies in a package of 2 x 4.4 x 0.93 inches. It is a Class-I design which is with PE (Protected Earth) function. PSU design include 0.5W input power saving at low load condition and output remote on/off control. This PSU is capable of delivering 50 watts continuous power at convection cooling and 50℃ operation temperature. Product is suitable for 62368 safety standard information, industry and networking application.
This series AC-DC switching power supply is Class-I design which is with Protected Earth. The units are constructed on a printed circuit board in a 112 x 50 x 21.9 mm inches form factor low profile. Feature with input power less than 0.5W is suitable for end products that have standby mode requirements. PSU is capable of delivering 50 watts of continuous power at convection cooling and 50℃operation temperature. They are suitable for industry and information applications.